Ebara 3D

3D

centrifugal pumps Close Coupled and standardizeD EN 733

Centrifugal pumps close coupled (3D) cast iron.

APPLICATIONS
  • Water and clean liquids not chemically aggressive handling
  • Water supply
  • Pressure boosting
  • Washing and industrial plants
  • Water circulation in air-conditioning systems
  • Irrigation and agriculture
TECHNICAL DETAILS
  • Highly resistant construction
  • Impeller in stainless steel
  • High efficiency
PUMP TECHNICAL DATA
  • Maximum working pressure: 10 bar
  • Temperature of the liquid:
    -5°C ÷ +90°C
    -5°C ÷ +110°C (H-HS-HW-HSW versions)
    -5°C ÷ +120°C (E version)
  • MEI > 0,4 for 3D(.) SERIES 2 poles, MEI > 0,1 for 3D(.) SERIES 4 poles
MOTOR TECHNICAL DATA
  • High efficiency IE2 motors starting from 0,75kW
    High efficiency IE3 motors starting from7,5kW up to 22kW
  • Self-ventilated 2 and 4 poles asynchronous motor
  • Insulation class F (B for high temperatures)
  • Protection degree IP 55
  • 230V ±10% single phase voltage 50Hz,
    230/400 ±10% (up to 4kW included) three phase 50Hz,
    400/690V ±10% (from 5,5 kW and above) three phase 50Hz
  • Protection is user’s responsibility

MATERIALS
  • Pump casing in cast iron EN-GJL-250-EN 1561
  • Impeller in:
    - AISI 304 for 3D(.) SERIES 32, 40, 50
    - AISI 316 microcasted for 3D(.) SERIES 65
  • Shaft in AISI 304 (part in contact with the liquid)
  • Mechanical seal in:
    - Ceramic/Carbon/NBR (standard)
    - Ceramic/Carbon/FPM (H version)
    - SiC/SiC/FPM (HS version)
    - Tungsten Carbide/Tungsten Carbide/FPM (HW version)
    - SiC/Tungsten Carbide/FPM (HSW version)
    - Ceramic/Carbon/EPDM (E version)

 

Ebara 3M

3M

centrifugal pumps Close Coupled and standardizeD EN 73

Centrifugal pumps close coupled (3D) cast iron.

APPLICATIONS
  • Water and clean liquids not chemically aggressive handling
  • Water supply
  • Pressure boosting
  • Washing and industrial plants
  • Water circulation in air-conditioning systems
  • Irrigation and agriculture

Centrifugal flanged electropumps, standardized
according to EN 733 and built in stainless steel AISI
304 (AISI 316)

APPLICATIONS
  • washing systems
  • enological and food systems
  • water treatment systems
  • pumping of fluids reasonably aggressive
  • conditioning systems
  • heating systems
  • pressure increase in industrial systems
  • systems for air treatment/humidification
TECHNICAL FEATURES
  • Robust hydraulic construction
  • Versatile, it is possible to handle a wide range of fluid
    (304 or 316 version)
  • Volute casing for high efficiency
  • With AISI 304 pump pump foot as standard
  • All pump casing fixed screw in AISI 304
  • Compact design
  • Wide range of performances with 2-4 poles motor
  • Standard dimension as ISO EN 733
  • Back pull out design - easy to dismantle, pump casing
    remain to the pipe
RANGE OF APPLICATION
  • Capacity up to 132 m3/h
  • Head up to 72 m
  • Maximum working pressure: 10 bar
  • Temperature of the liquid: from -10°C to 90°C standard
    -20° +110°C in H version
MATERIALS
  • Pump casing, impeller, casing cover and shaft in AISI 304
  • Mechanical seal in carbon/standard/ceramic/NBR
  • Mechanical seal version H in carbon/ceramic/Viton
  • Mechanical seal version HS in SiC/SiC/FPM
STANDARD MOTOR DATA
  • asynchronous motor 2 poles and 4 poles ventilated
  • insulating class F
  • protection degree IP55
  • mono-phase voltage 230+/- 10%
  • three-phase voltage 230+/400V +/-10% 50Hz till 4kW,
    400/690V +/- 10% 50Hz for higher powers
  • protection edited by the user
Ebara CMA-B-C-D

CMA-B-C-D

centrifugal pumps Close Coupled and standardizeD EN 733

Centrifugal pumps close coupled (3D) cast iron.

SINGLE IMPELLER CENTRIFUGAL ELECTRIC PUMPS

APPLICATIONS
  • Pressure boosting domestic plants
  • Small-scale irrigation
  • Moving non-aggressive liquids for civil and industrial use
  • Washing plants
  • Washing vehicles
TECHNICAL DETAILS
  • Available with brass impeller (CMA 0.50 M GO, CMA 0.75 M GO,
    CMA 1.00 M GO)
  • The CMR version is equipped with an open impeller
  • They can be inserted into machinery for industrial use
PUMP TECHNICAL DATA
  • Maximum working pressure:
    - 6 bar for CMA 0.50 - 0.75 - 1.00, CMB 0.75 - 1.00 - 1.50 - 2.00 -
    3.00, CMC , CMD , CMR
    - 8 bar for CMA 1.50 - 2.00 - 3.00, CMB 4.00 - 5.50
  • Maximum temperature of the liquid:
    - 40°C for CMA 0.50 - 0.75 - 1.00
    - 90°C for the rest of the range
  • G1 suction connection for CMA 0.50 - 0.75 - 1.00,
    G1¼ for CMA 1.50 - 2.00 - 3.00,G2 for CMB - CMC,
    G2½ for CMD
  • G1 discharge connection for CMA, G1¼ for CMB, G1½ for CMR,
    G2 for CMC, G2½ for CMD
    MEI>0,4 (CMA-CMC), MEI>0,1 (CMB-CMD) For further information
    please see our Data Book
MOTOR TECHNICAL DATA
  • High efficiency motors IE2 starting from 0,75kW
  • Self-ventilated 2 pole asynchronous motor
  • Class of insulation F
  • IP44 Protection degree
  • 230V ±10%, 50Hz single phase voltage,
    230/400V ±10%, 50Hz three phase voltage
  • Permanent capacitor inserted and thermo-amperometric protection with automatic rearm incorporated for the single phase motor
  • Protection under user's responsibility for the three phase version
MATERIALS
  • Cast iron pump casing
  • Mechanical seal in Carbon/Ceramic/NBR
  • Impeller:
    - in PPE+PS reinforced with fibreglass for CMA 0.50 - 0.75 - 1.00
    - in brass for CMA 1.50 - 2.00 - 3.00, CMB 2.00 - 3.00 - 4.00 - 5.50,
    CMR 0.75-1.00
    - in cast iron for CMB 0.75 - 1.00 - 1.50, CMC, CMD
  • Shaft:
    - in AISI 416 (integral) for CMA 0.50
    - in AISI 303 (part in contact with the liquid) for CMA CMA 0.75 -
    1.00 - 1.50 - 2.00 - 3.00, CMB 0.75 - 1.00, 1.50 - 2.00 - 3.00, CMC
    0.75 - 1.00
    CMD 1.50 - 2.00 - 3.00, CMR 0.75-1.00
    - in AISI 304 (part in contact with the liquid) for CMB 4.00 - 5.50,
    CMD 4.00
  • Bracket:
    - in aluminium for CMA 0.50 - 0.75 - 1.00, CMB 0.75 - 1.00,
    CMC 0.75 - 1.00, CMR 0.75-1.00
    - in cast iron for the rest of the range
Ebara DVS

DVS

Applications
Ideal for waste water applications containing soft or fibrous solids.
Industrial waste water drainage
Septic effluent.
Miscellaneous drainage

FEATURES
  • No clogging with semi-vortex construction
  • Semi-vortex impeller offers non-clog operation and allows pumping of foreign particle
  • Built-in motor protection
  • Double mechanical seal
  • DVSA model permits automatic operation
  • Parallel alternate operation possible with DVSA and DVSJ models
Ebara FSA

FSA

EBARA END SUCTION VOLUTE PUMPS

APPLICATIONS
  • Industrial use
  • Water supply
  • Hot and cold water circulation
  • For swimming pool
  • Sprinkling
  • Air-conditioning
  • Fire-fighting application
FEATURES
  • Easy removal and maintenance, BPO (Back Pull Out) system allows all rotating element to be removed without disconnecting suction and discharge pipe work
  • Top centreline discharge, foot support under casing for maximum resistance to misalignment and distortion from pipe loads
  • Non-overload design to ensure stable performance for all applications
  • Wide range application with flow capacity up to 22 m3/min
  • Higher working pressure up to 16 bar